Clicking 'Add computer' at the bottom of the KVM tab on the Primary will bring up the option to add a Secondary computer. If the desired computer is not found automatically, it can be added by the IP address instead. Click the 'Add' button once complete.
If this is a first-time installation, and you have selected 'KVM mode', you will be automatically presented with the 'Add computer' menu.
 |  |
|---|
Adding a Secondary by IP is the desired method if one or the other PC is connected to a VPN. You would add the IP where both machines share the same subnet.
On the following screen, add the passcode (case sensitive). You can test the connection by clicking the check connection button. If the connection is successful, you will see the following.
Click 'OK' and then 'Save' on the prior screen to add the KVM connection. Next, enter the key combination that will initiate KVM mode.
Click in the box and enter the desired key combination (Ctrl + 1 for example). Close the configuration window and then press the chosen key combination to enter KVM mode.
Click the desired KVM connection and then 'Connect'.
If it fails to connect, please see the troubleshooting page for assistance.